The vibration feeder is a commonly used feeding equipment. It is widely used in metallurgy, mining, coal, electric power, chemical, building materials, light industry and food industries and so on. Many users often find that the tank has been sticky in the process of use, which seriously affects the normal use. If the problems above occur, please check the following four aspects:

1. the amplitude is so small that can not effectively overcome the sticky force between the material and the tank, resulting in the accumulation of the tank, especially at the bottom.

Change measures: adjust the vibration force of the vibration motor, and detect whether the damping spring needs to be replaced.

2.The vibration direction of the vibration motor is wrong. The vibration force of vibration motor of dual-body vibration feeder has direction requirement. If the vibration motor reverses, the ejection Angle is forward, but the material has the force of backward rolling. At this time, the speed of forward migration is much slower, and the residence time is too long on the tank to discharge material.

change measures: invert to change the motor steering.

3. The installation angle of the dual-body vibration feeder is too small. Because of the different material sticking index, the appropriate installation angle of the feeder is also different. The feeder angle is too small that the material run slowly and the tank is easy to stick.

change measures: adjust and make the installation angle bigger appropriately under the premise of the material not running .

4.The lining plate selection of the feeder is not appropriate. The friction coefficient of the lining plate is large and the material is easy to stick.

change measures: replace the lining plate whose friction coefficient is low, such as polymer polyethylene, stainless steel, etc.

After the four aspects of investigation above, the problem has not been greatly alleviated. If your dual-body vibration feeder tank sticks materials, you can contact Hebi Coal Chemical Machinery. my company will provide you with free vibration feeding machinery for specific materials with 35 years of vibration feeding equipment production experience, for your end!

Contact: 400-027-4898